Three Phase Double-Wound Industrial Transformers
- Primary and secondary voltages to customer specification
- Seperate primary and secondary windings
- Ventilated steel cases for indoor use
- From 2kVA to 100kVA
Three Phase Industrial Transformers
Three Phase Double-Wound Industrial Transformers
Our range of double-wound electrical transformers are designed and manufactured to meet the highest standards needed in industry today.
All transformers are normally supplied in IP22 indoor ventilated enclosures with cable entry and exits. Open type units can be supplied if required.
All of our Three Phase Double-Wound Transformers:
- Have high grade copper windings to BS60317, finished by varnish impregnating.
- Cores have electrical steel laminations to BS/EN10165/10107.
- Have double wound connections. Delta/Star.
- Terminations are to Klippon terminal blocks or nut and stud connections.
- Cases are steel ventilated case for indoor use. Wall or floor mounting. Cable entry via conduit entry and exit holes.
Primary and secondary voltages may be fully customised to your individual specification. As a result, the weight of these units depends on your specifications.
Three Phase Double-Wound Transformer Specifications
2kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P2D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 2kVA
-
Dimensions (mm): 317 x 332 x 455
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventillated enclosure or as open type units.
3kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P3D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 3kVA
-
Dimensions (mm): 317 x 332 x 455
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
5kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P5D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 5kVA
-
Dimensions (mm): 317 x 332 x 455
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
10kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P10D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 10kVA
-
Dimensions (mm): 432 x 300 x 500
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
15kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P15D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 15kVA
-
Dimensions (mm): 432 x 380 x 500
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
20kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P20D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 20kVA
-
Dimensions (mm): 432 x 380 x 500
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
25kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P25D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 25kVA
-
Dimensions (mm): 640 x 460 x 700
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
30kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P30D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 30kVA
-
Dimensions (mm): 640 x 460 x 700
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
40kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P40D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 40kVA
-
Dimensions (mm): 640 x 460 x 700
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
50kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P50D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 50kVA
-
Dimensions (mm): 780 x 560 x 860
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
60kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P60D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 60kVA
-
Dimensions (mm): 780 x 560 x 860
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
70kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P70D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 70kVA
-
Dimensions (mm): 780 x 560 x 860
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
80kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P80D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 80kVA
-
Dimensions (mm): 780 x 560 x 860
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
90kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P90D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 90kVA
-
Dimensions (mm): 780 x 560 x 860
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
100kVA 3 Phase Double-Wound Transformer
-
Cat No. 3P100D
-
Input Voltage: 415V
-
Output Voltage: Customer specified
-
Rating: 100kVA
-
Dimensions (mm): 780 x 560 x 860
These three phase double-wound industrial transformers feature electrical steel cores, enamelled high-grade copper windings to EN 60317 which are varnish impregnated for protection.
Input and Output voltages can be customised to your individual specifications. Can be supplied in ventilated enclosure or as open type units.
Burrows Electrical Ltd
Ansona Works,
Steamer Terrace,
Chelmsford,
Essex CM1 1QP
T: 01245 267 428
Burrows Electrical Limited
Registered Company No: 01095599 in England & Wales
Registered Office: The Old Grange Warren Estate, Lordship Road, Writtle, Essex. CM1 3WT
Website
Ok, here's the small print!
Terms & Conditions. The Terms & Conditions for using our web site can be found here.
Privacy Policy. Our Privacy Policy outlines how we use any data collected from you.
Web Design by Mike Wintersgill